Hasselblad H2F Manuale Utente Scaricare il pdf (Pagina 43)

Manual focus

There is both a Manual Focus mode setting and a Manual Override capability. Manual Focus

is a specic setting that you actively make, whereas Manual Override is always available as a

temporary override of an autofocus setting.

In Manual Focus mode, focusing is carried out by rotating the focusing ring in the conventional

manner. The focus setting remains until changed as with a conventional non-autofocus lens. This

means that pressing the shutter release button will not activate a focus setting change as it does in

autofocus. To change back to autofocus, you must make a new setting (by pressing the AF button

and choosing AF S or AF C).

With Manual Override, you can manually alter a focus setting that has been made in the auto-

focus mode, by rotating the lens barrel in the conventional manner and without having to change

modes. As long as the shutter release button is kept at the half-press position, the new focus setting

is maintained. By releasing the pressure on the shutter release button and pressing again, the auto-

focus function is immediately reactivated.

OFF

From the active screen, press (not click !) the red ON.OFF button for a half second. All

buttons (except the ON.OFF button) remain ineective, producing minimal demand on

the batteries. is is the normal mode when transporting or storing the camera or where

there might be a risk of inadvertently activating the camera. (However, remove the bat-

teries if you are going to store the camera for a period of more than a few weeks).

In this mode neither the viewnder LCD nor grip LCD information is available. e maga-

zine LCD, however, will continue to display information as it is independently powered.

OFF mode is automatically set aer six hours of inactivity in Standby mode.

Standby

In this mode the camera is in a mainly inactive ‘standby’ mode and is ready to be im-

mediately reactivated to the ON mode by:

• pressing the shutter release button half way

• clicking the ON.OFF button

• pressing the Stop down, Mirror up, User or AE-L button

In this mode, signalled by the standby H2F logo appearing on the grip LCD, the demand

on the batteries is very low. It is ideal for general use where intervals between shots exceed

a few seconds.

Standby mode is automatically set from the ON mode aer 10 seconds (default) of inac-

tive use (programmable in Custom Options).

To activate the camera press the red ON.OFF button until you see the start-up H2F logo

appear on the grip LCD. e logo is automatically followed by the main screen. e

camera is now in ON mode.

Aer a set period of inactivity (programmable in Custom Options) the camera automati-

cally enters Standby mode, signalled by the appearance of the H2F logo again.

Power

The camera can be set at two active power modes −

Standby

− as well as

OFF

. In active

modes, battery consumption is least in

Standby

mode and most in

mode. The camera enters

Standby

mode automatically after 10 seconds (default) to preserve battery consumption but this

interval can be changed in Custom Options. Also, after 10 seconds, the display on the OLED on the

sensor unit is dimmed and after 30 seconds the display is turned o completely. After 3 minutes the

sensor unit enters the Standby mode. Settings can only be made when the camera is in the

mode (the sensor unit has its own Standby setting).

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 85 86

Commenti su questo manuale

Nessun commento

Hasselblad H2F Manuale Utente Pagina 43

Commenti su questo manuale