Hasselblad H2F Manuale Utente Pagina 21

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 86
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 20
21
A B C D E F
G H
1
2
Integral ash unit
See section on ‘Flash’ for full details.
Rubber eye cup
Two rubber eye cups are available for the H2F. e one supplied is suitable for users who
do not intend to use eyeglasses when photographing. e second shorter eye cup is for
those who either prefer to position their eye further from the viewnder and those who
wish to wear eyeglasses.
e eye cups can be rapidly changed by a Hasselblad Authorized Service Center.
Eyepiece adjustment
No corrective lenses are needed to adjust the eyepiece to suit most requirements. e
diopter range is from -4 D to +2.5 D. Eyeglass wearers can rapidly and accurately change
the settings according to whether they wish to wear eyeglasses for viewing or not.
Personal eyepiece adjustments can be carried out by pointing the camera at the sky or
similar smoothly toned area. While holding the camera in your le hand, you can with
your right thumb turn the adjustment wheel until the markings on the viewnder screen
reach the optimum sharpness for your eyesight.
If you normally wear eyeglasses for distance viewing and intend to wear them for camera
use then do not remove them for the above procedure. If, on the other hand, you prefer
to remove your eyeglasses for camera work, then repeat the above procedure without
wearing your eyeglasses.
Attaching and removing the viewnder
While holding the viewnder at a slight angle and resting it on the top of the camera,
slide the viewnder forward until the front locating pin is in position in the recess in the
front edge of the viewnder screen aperture on camera body. Press the rear part of the
viewnder rmly downwards until it clicks into place.
Ensure that both sides of the viewnder are seated correctly and that it has been rmly
attached. Failure to do so could cause an intermittent malfunction if the databus interface
connections between the viewnder and camera body are not positively secured.
To remove, grasp the viewnder in the right hand and while depressing the viewnder
release button, li the rear of the viewnder up and away from the camera body.
A. Rubber eye cup
B. Hot shoe
C. Eyesight adjustment wheel
D. Exposure compensation button
E. Exposure method / mode button
F. Integral ash unit
G. Flash unit button
H. Viewnder release button
Parts & Components
Vedere la pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 85 86

Commenti su questo manuale

Nessun commento